Categories
 
 
Welding torchesTIG accessoriesCollet holderCollet holder 2.0 47mm /TE0001-20/10N31M/701.0196-ZVAR/ TIG/17/18/26 standard
 
 
 

Collet holder 2.0 47mm /TE0001-20/10N31M/701.0196-ZVAR/ TIG/17/18/26 standard

Collet holder 2.0 47mm /TE0001-20/10N31M/701.0196-ZVAR/ TIG/17/18/26 standard
View Full-Size Image
Collet holder 2.0 47mm /TE0001-20/10N31M/701.0196-ZVAR/ TIG/17/18/26 standard
 
Man

Do you need advice?

If you have not found the answer to any of your questions, please contact us directly.
+421 948 488 885

Collet holder 2.0 47mm /TE0001-20/10N31M/701.0196-ZVAR/ TIG/17/18/26 standard

SKU:701.0196-2,0-ZVAR
Manufacturer:OSTATNÝ
Electrode holder for TIG torches 17/18/26 with diameter 2,0 mm and length 47 mm.
Availability
In Stock: 404
Usually ships in: Stock
Price: 1,39 € without TAX
1,67 € incl. tax
 ks
Add to the Wishlist
Plate holder (plate house) - if the holder contains a strainer, it is called a gas lens. The key is inserted into the key holder. The clamp holder must be selected according to the size of the burner. For small TIG9 and TIG20 torches the 9/20 holder is compatible, for large TIG17/18/26 torches the 17/18/26 holder is compatible.The pincer holder has four holes on the sides through which the welding gas flows. Depending on whether the gas is further guided by the strainer or not, there are two types of holders:- the wedge holder with strainer, the so-called gas lens - the strainer evenly sprays the gas and helps to achieve better welds (the same principle as the strainer on the faucet). Without the strainer, the water twists a little, with the strainer it flows gently, sprayed - the same applies to the gland holder with strainer and welding gas.- standard gland holder - the gas flows directly through the holes and creates a slight turbulence.
Parameters
Modula:Yes
Pozícia:M16S13
Dĺžka:47 mm
Priemer:2,0 mm
Typ horáka:SR 17 / 18 / 26
Man

Do you need advice?

If you have not found the answer to any of your questions, please contact us directly.
+421 948 488 885